Almost Chrome
10” Combination Airway Buffing Wheels
10” Combination Airway Buffing Wheels
Couldn't load pickup availability
Combination Airway Buffing Wheels For Metal Polishing
The Combination Airway Buffing Wheels are expertly crafted using multiple mill treatments and fabric construction methods to offer wheels with distinct stiffness levels that catering to the specific needs of different metals. Whether you're working with aluminum, stainless steel, or other metals, our range of buffing wheels provides exceptional performance and results.
<head><meta charset="UTF-8" /></head>
Tailored Buffing Wheels for Different Needs:
Maverick: Red/Pink Airway Buffing Wheel
Our "Maverick" Airway Buffing Wheel is constructed using an extra-stiff Red mill treat cotton cloth and a semi-stiff Pink mill treat cotton cloth. It boasts a robust 20-ply construction and is most appropriate for the "cutting" stage on both aluminum and stainless steel. This particular Airway Buffing Wheel should be run at approximately 3,500 RPM and used with cutting compounds such as our T88 or T121 Tripoli Bars, our Q36 Illudium cut-and-color bar, or our new Wild Berry and Wild Cherry Pink Compounds. Its primary function as a "cutting" buff is backed up by an added measure of finishing properties to allow for a broader spectrum of metal finishing.
Sundown: Orange/Yellow Airway Buffing Wheel
Our "Sundown" Airway Buffing Wheel is constructed using an Orange mill treat cotton cloth and a Yellow mill treat cotton cloth. It employs a 16-ply #2 construction (which adds density to the wheel) and is most appropriate for the "color" stage on both aluminum and stainless steel. This particular Airway Buffing Wheel should be run at approximately 2,500-3,000 RPM and used with color compounds such as our Green Tripoli or Yellow Deluxe Polishing Compounds.
Jester: Purple/Yellow Airway Buffing Wheel
Our "Jester" Airway Buff incorporates our Purple and Yellow Buffing Wheel fabrics to provide a more subtle cut with the yellow fabric that is followed the softer purple fabric to help create a more seamless transition before moving on to your finishing buffing wheel and compound bar combination.
Hollywood: UBM + UBM Airway Buffing Wheel
The Hollywood Airway Buffing wheel consists of a blend of fine and coarse Unbleached Muslin (UBM) to be used as a semi-finish buffing wheel on flatter, broader surfaces.
Cyclone: Flannel + UBM Airway Buffing Wheel
Our Cyclone Airway Buffing Wheel is a blend of Unbleached Muslin UBM and soft Domet Flannel fabrics that work together to give you a high-level shine when paired with one of our finishing bars.
You use the edge of the buffing wheel to polish?
Yes! Edge buffing is a technique commonly used in conjunction with an angle grinder, a buffing wheel, and compound. Achieve a shiny, polished edge effortlessly. See below:
Pro tip: Always rake your buffing wheels.
How do I use a buffing wheel rake?
The buffing wheel should be spinning at it’s normal speed and the rake should be held securely when held up to a stationary bench grinder or lathe. On a grinder, please exercise caution when raking. We recommend using your feet to hold the rake to the ground and holding the angle-grinder to it.
Why should I use a buffing wheel rake?
Raking your buff removes hardened and burned on polishing and buffing compound from the edges of your buffing wheel. Compound build up can reduce the efficiency of the buffing wheel while also creating a rougher surface. If you notice a significant decrease in the residual metal dust produced when buffing, rake the buffing wheel and reapply a small amount of metal polishing compound.
What Polisher/Grinder Goes best with these buffing wheels?
MAKITA 9237C- The best 3,500 RPM polishing machine (PROS & BEGINNERS)
MAKITA GA7021 - The best 6,000 RPM polishing machine (PROS)
What are the safety requirements for buffing wheels & metal polishing?
We HIGHLY recommend that you use a full face respirator mask! This FULL FACE RESPIRATOR MASK is highly recommended and great quality.
Generally speaking, our Airway Buffing Wheels should be run at the following speeds:
-
First Stage/"Cut" Stage: 3,000 to 3,500 RPM
- Red-Pink Airway Buffing Wheel + Brown Tripoli Metal Polishing Compound, T121 Fast Cut Compound, or Q36 Illudium Cut-and-Color Compound for both aluminum and stainless steel. It can also be paired with our WildBerry and WildCherry intermediate polishing compounds.
-
Second Stage/"Color" Stage: 2,200 to 2,800 RPM
- The Orange-Yellow Airway Buffing Wheel and the Purple-Yellow Airway Buffing Wheelcan be paired with the Green Rouge Metal Polishing Compound, Yellow Deluxe Compound, or the WildBerry and WildCherry intermediate polishing compounds.
-
Third Stage/"Finish" Stage: 1,800 to 2,200 RPM
- Use the "Hollywood" or "Cyclone" Airway Buffing Wheels can be used with any of our finishing bars, such as the White Rouge, Blue Rouge, or Competition Purple Metal Polishing Compound.
